Downrod (continued) – Hunter 52089 34 Watson User Manual
Page 8
www.HunterFan.com
1.888.830.1326
8
M0043-01 • 01/29/14 • © Hunter Fan Company
KEEP!
8”
3/8”
CU
T
&
ST
R
IP
(not to scale)
Remove the pre-installed
setscrew so that the downrod
can be inserted.
Hand tighten the downrod (at
least 4-5 full turns) until it stops.
The wires can be cut, but
leave at least 8” extending
from the top of the downrod.
Downrod (continued)
8”
3/8”
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
If the setscrew is not tightened
securely, the fan may fall.
KEEP!
This manual is related to the following products:
- 52090 34 Watson 53029 52 Vernazza 53025 52 Mayse 53218 52 Jameson 53048 52 Kensington 53047 52 Kensington 53005 52 Lake Cottage 52103 52 Laurelwood 53024 52 Covington 53023 52 Etruscan 53177 52 Banyan 53176 52 Banyan 53175 52 Banyan 52221 52 Bowmore 52222 52 Bowmore 53090 52 Builder Deluxe 53089 52 Builder Deluxe 53091 52 Builder Deluxe 53057 52 Astoria 53059 52 Astoria 53058 52 Astoria 53255 56 Markley