Switch housing – Hunter 52089 34 Watson User Manual
Page 13
www.HunterFan.com
1.888.830.1326
Feed the wire plug through the center
hole of the upper switch housing, then
wrap keyhole slots around the screws and
twist counterclockwise.
Screw two (2) housing assembly screws
from the hardware bag halfway into
the motor housing. It does not matter
which two screw holes you choose.
Insert the third screw, found in
the hardware bag, into place and then
tighten all three (3) screws.
Make sure the upper switch housing is securely
attached to the mounting plate. Failure to properly
secure all 3 assembly screws could result in the switch
housing fixture falling.
Switch Housing
13
M0043-01 • 01/29/14 • © Hunter Fan Company
This manual is related to the following products:
- 52090 34 Watson 53029 52 Vernazza 53025 52 Mayse 53218 52 Jameson 53048 52 Kensington 53047 52 Kensington 53005 52 Lake Cottage 52103 52 Laurelwood 53024 52 Covington 53023 52 Etruscan 53177 52 Banyan 53176 52 Banyan 53175 52 Banyan 52221 52 Bowmore 52222 52 Bowmore 53090 52 Builder Deluxe 53089 52 Builder Deluxe 53091 52 Builder Deluxe 53057 52 Astoria 53059 52 Astoria 53058 52 Astoria 53255 56 Markley