J&M 1075-18R - Manual (Page 21)

21
#
W/T
Part # Description
W
1 55WS Rear Weigh spindle with cable
45WS Rear Weigh spindle with cable (Duals)
2 278WS Front Hitch Weigh Bar with cable
3 615
915 Indicator Box with mounting plate
5 PC-2 Power Cord (to battery)
8 ATP-55 Adapter Tubing Pipe
9 MBI-2 Mounting Bracket for Indicator
10 WBW-278 Weigh Bar Weldment
11 BB-2 Battery Box with strap
12 343-BWN 3/4" x 3" Bolt (G8) w/ hvy lock washer, nut
14 MB-381 3/8" x 1" Bolt with nut
16 MB-1434 1/4" x 3/4" Bolt with nut
WEIGH SCALE RETROFIT KIT
NOTE:
When inserting both the weigh
spindles or the hitch weigh bar,
be sure that the TOP of the
spindle is in the upright position
as indicated by the decal on
each weigh bar.
Failure to correctly align the
weigh bar and spindles in the
upright position will cause the
scale system to read with
greater inaccuracy.
Weigh Scale Retrofit Parts List (Weigh Tronix)