J&M 1325-22LA - Manual (Page 22)

23
ELECTRONIC WEIGH SCALE SYSTEMS
(FOR GRAIN CARTS EQUIPPED WITH TRACKS)
#
D/S
Part # Description
D/S
Qty
1 ------- --------------- ---
2 250WB Weigh Bar with Cable 5
3 EZ-2000 Indicator Box with mounting plate 1
4 JB-2 Junction Box (5 pt.) for Tracks 1
5 PC-1 Power Cord (to battery) 1
6 ECI-1 Extension Cord (to mount in tractor cab) 1
7 37605SA Seal (Hub) 2
8 ------- --------------- ---
9 MBI-1 Mounting Bracket for Indicator 1
10 WBW-1 Weigh Bar Weldment 1
11 BB-2 Battery Box with strap 1
12 343-BWN 3/4" x 3" Bolt (G8) w/ hvy lock washer, nut 4
13 MB-58612 5/8" x 6 1/2" Bolt (G5) with nut 4
14 MB-381 3/8" x 1" Bolt with nut 6
15 PB-10 #10 Pan Bolt with nut 4
NOTE:
When inserting both
the weigh spindles or
the hitch weigh bar, be
sure that the TOP of
the spindle is in the
upright position as
indicated by the decal
on each weigh bar.
Failure to correctly
align the weigh bar
and spindles in the
upright position will
cause the scale
system to read with
greater inaccuracy.
Scale System Parts List (for Digi-Star Systems Only)