J&M 818 - Manual (Page 3)

818 GRAIN CART SPECIFICATIONS
DIMENSIONS
A)
B)
C)
D)
E)
F)
G)
H)
J)
K)
L)
M)
1’-7” (0,48m)
13’-6” (4,15m)
6’-4” (1,93m)
16’-0” (4,88m)
20’-11” (6,38m)
12’-9” (3,88m) (standard)
13’-9” (4,23m) (w/HS-18 option)
7’-3” (2,21m)
8’-2” (2,51m) (w/HS-18 option)
11’-6” (3,51m)
11’-9” (3,58m)
10’-11” (3,33m)
10’-0” (3,05m)
12’-6” (3,81m)
SPECIFICATIONS
Capacity*
Auger (one vertical)
Wheels
Hubs
Spindle Size
Weight (approx.)
PTO
Tire Size
Tongue Weight:
Empty
Loaded
Construction:
Hopper
Undercarriage
Axle
Unload Time**
875 bushels (corn)
22,3 metric tons (corn)
23,82 metric tons (wheat)
18” (0,46m) diameter
27x32 - 10 bolt
10 bolt
4 1/2” (0,12m) diameter
11000 lbs. (4986,60 kg)
1000 rpm
30.5x32 R1 Lug, 12 ply
1600 lbs. (725,76 kg)
3900 lbs. (1769,04 kg)
11 GA Steel
8” x 4” x 5/16” Tubing
20,32cm x 10,16cm x 0,79cm
5” x 5” x 1/2” Tubing
12,70cm x 12,70cm x 1,27cm
2 Minutes (approx.)
Note: Specifi cations are subject to change without notice or obligation.
* Bushel capacities measured with #2 corn at 15% moisture, 56 lb.
(25,4 kg) test weight)
** Time varies with rpm and moisture content of grain.
J G
K
M
L
D C
F
B
E
H
A
GENERAL INFORMATION
TO THE OWNER:
The purpose of this manual is to assist you in operating and maintaining your grain cart in a safe manner. Read it
carefully. It furnishes information and instructions that will help you achieve years of dependable performance and help
maintain safe operating conditions. If this machine is used by an employee or is loaned or rented, make certain that the
operator(s), prior to operating:
1. Is instructed in safe and proper use.
2. Reviews and understands the manual(s) pertaining to this machine.
Throughout this manual, the term IMPORTANT is used to indicate that failure to observe can cause damage to equipment.
The terms CAUTION, WARNING and DANGER are used in conjunction with the Safety-Alert Symbol (a triangle with an
exclamation mark) to indicate the degree of hazard for items of personal safety. When you see this symbol, carefully read
the message that follows and be alert to the possibility of personal injury or death.
This Safety-Alert symbol indicates a hazard and means
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Indicates an imminently hazardous situation that, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided,
will result in death or serious injury, and includes hazards that are
exposed when guards are removed.
Indicates a potentially hazardous situation that, if not avoided, may
result in minor or moderate injury.
Indicates that failure to observe can cause damage to equipment.
Indicates helpful information.
DANGER
WARNING
CAUTION
IMPORTANT
NOTE
!
!
!
!
- 3 -