beautypg.com

Nilfisk-ALTO Elvis Series User Manual

Page 7

background image

-. For Active Subwoofer & Satellite Speakers

1). Connect one side of signal cable at your audio mixer in to Output Left /Right (with Stereo-Jack or XLR) and the other

side of the cable in to the Left / Mono Input (COMBO) of the active subwoofer; with the second signal cable connect
the Left Output of the subwoofer (Stereo/Mono-Jack or XLR) to the Line Input (COMBO) of the active satellite (with
Stereo - Jack or XLR).

6

Tripod
Mount

Tripod
Mount

Left

Main Mix

Output

Right
Main Mix
Output

QUICK START

Elvis Active Subwoofer & Satellite Speakers

Signal Cable

Signal Cable

Power Cord

3). Turn on your mixer first, then the active speaker cabinets.

2). Connect the power cord to mains.

5). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the

output level.

4). Turn up the volume control fo the active speaker cabinets.

6). After using, turn off your active speaker cabinets first, then the mixer.