Nilfisk-ALTO Elvis Series - Manual (Page 4)

1. QUICK START - PASSIVE SPEAKER CABINET
-. For Passive Full-range Speakers
QUICK START
Elvis Passive Full-range Speakers
3
Stereo
Power Amplifier
speaker cable
Tripod
Mount Left
Main Mix
Output
Right
Main Mix
Output
Mixer
Tripod
Mount
3). Turn on your mixer first, then the stereo power amplifier.
4). Turn up the volume controls of your amplifier to about 70%.
2). Complete other connections as illustrated.
Make all initial connections with all the equipment powered off, and ensure that all the main volume controls are turned completely
down.
1). Connect one side of the speaker cable to the Output CHA/CHB or Binding Post of your stereo power amplifier
and the other side to the Input socket of your speaker cabinet.
5). Use PFL function to get the proper input level for the mixer, and adjust the Main Mix Level control to manipulate the output
level.
6). After using, turn off your stereo power amplifier first, then the mixer.
speaker cable