Actiontec electronic HPAP108T - Manual (Page 21)

18
Actiontec MegaPlug Wireless Network Extender User Manual
19
Chapter 4 Using the Web Configuration Interface
IP Settings
Clicking IP Settings on the left side of any Interface screen causes the “ IP Settings”
screen to appear. There are two options in this window: Obtain an IP address
automatically, and Specify an IP address.
Obtain an IP Address Automatically
Select this option (by clicking the appropriate radio button) to have the Extender
obtain an
IP address automatically from a router on the Homeline etwork.
Specify an IP Address
Select this option (by clicking the appropriate radio button) to specify an IP
address. After selecting this option, enter the IP address, subnet mask address, and
default gateway address in the appropriate text boxes.
Wireless Network
Clicking Wireless Network on the left side of any Interface screen causes the
“Wireless Network” screen to appear. Here, the Extender’s wireless settings can
be configured.