Carolina 2816K PERIMETER WORKSTATION - Manual (Page 4)

- 4 -
Assembly Instructions for
2816K PERIMETER WORKSTATION
Items not included but needed for assembly:
1. Screwdrivers and wrenches
2. Contact cement
3. Utility Knife 4. Tape measure
5. Clear silicone adhesive
6. Drill and 1/8” drill bit
Instructions:
1. Find the two cabinets with cleats that run from top to bottom and place the two cabinets against the
wall with the cleats facing each other. Cabinets should be placed 42” apart.
2. Screw the 42”x 30” access panel in place using the #10 x 1-1/2” Phillips truss head screws. (*NOTE:
All cleats should be predrilled with 1/8” bit when attaching access panels and fillers.)
3. Screw the 5”x 42” base panel to the cleats on the two cabinets using the #10 x 1-1/2” Phillips truss
head screws.