Burke Flooring Burke Marble - Manual (Page 3)

Anhydrous Calcium Chloride or 80% when tested accordance
with ASTM F 2170 Standard Test Method for Determining
Relative Humidity in Concrete Floor Slabs using in situ
Probes. If the tests results exceed the limitations, the
installation must not proceed until the problem has been
corrected.
3.1. Adhesives:
Burke #BR-711 Flooring & Tread Adhesive:
Porous Substrates: 1/16" square-notched trowel
(Approximately 125 - 150 sq ft /gal)
Non-Porous Substrates: 1/16" V-notched trowel
(Approximately 150 - 175 sq ft /gal)
Important: This adhesive is substrate porosity
sensitive. Determine if the substrate is porous or
non-porous prior to application of the adhesive and
installation of the flooring products and follow the
appropriate instructions.
Burke #BR-721 Two-Part Epoxy Adhesive:
Trowel: 1/16" square-notched trowel
(Approximately 125 - 150 sq. ft/gal)
Burke #BR-725 Two-Part Urethane Adhesive:
Trowel: 1/16" square-notched trowel
(Approximately 125 - 150 sq. ft/gal)
4. INSTALLATION MANUAL
Refer to Burke Rubber Floor Tile installation instructions for
complete installation details.
5. AVAILABILITY AND COST
Available through authorized Burke distributors nationwide.
6. WARRANTY
Limited 5 and 10 year wear warranties available.
For complete details, contact Burke or an authorized Burke
distributor.
7. MAINTENANCE
72 hours after installation is completed, initial maintenance
procedures must be implemented in accordance with
manufacturer's requirements. Refer to Burke Rubber
Tile Installation Instructions for complete maintenance
details.
8. TECHNICAL SERVICES
Samples: Submittal samples for verification and approval
available upon request from Burke. Samples shall be
submitted in compliance with the requirements of the
Contract Documents. Accepted and approved samples shall
constitute the standard materials which represent materials
installed on the project.
For current Installation and Maintenance Instructions, Product
Specifications, and other technical data, visit us on the web at
www.BurkeFlooring.com or contact Burke at 1-800-447-8442.
Revision 1 - Released March, 2011 © Burke Flooring, A Division of Burke Industries