Actiontec SBWD100A, SBT100U User Manual - Manual (Page 18)

16
Updating Software
and Firmware
This chapter details the procedures to upgrade the ScreenBeam software and
firmware. The first section details updating the ScreenBeam software if you are
using ScreenBeam with a Windows 7/8 laptop/PC; the second explains how to
update the firmware on the ScreenBeam Display Receiver if you are using Miracast
or Intel WiDi.
Updating Software on Windows 7/8 Devices
This section explains how to update your ScreenBeam software if you are using
both the ScreenBeam Display Receiver and Transmitter with a Windows 7/8
laptop/PC.
1. Make sure that ScreenBeam is disconnected. Then, right-click on a profile
from the main ScreenBeam window and select “Check for updates…”
Note: Performing a software update may cause the ScreenBeam application
to restart. If this occurs, relaunch ScreenBeam after the update is completed.
4