Wiring, Connector, Wire specification – MoTeC ESDL3 User Manual
Page 55: Motec appendices 51, Wire, Crimp tool
MoTeC
Appendices
51
Wiring
This section provides reference material about the Dash Logger's connector
and wiring requirements.
Connector
SDL3 connector
37 pin Autosport connector
Mating connector
#68089
Wire Specification
Wire
Wire to suit Dash Logger connector: 22# Tefzel, Mil Spec : M22759/16-22
M22759/16 Wire Ratings (for various wire gauges)
Insulation Material: Tefzel
Conductor: Tin Plated Copper
Voltage Rating: 600 V
Maximum Temperature: 150
°C
Wire Gauge
[AWG]
Cross
Sectional Area
[mm2]
Max Current
at 100
°C
Ambient [A]
Resistance
[ohm/m]
Resistance
[ohm / 1000 ft]
22 0.38 5 0.045
14.0
20
0.61
6
0.028
8.5
18 0.96 9 0.018
5.5
16
1.2
12
0.014
4.3
14 1.9
18 0.009
2.7
12
3.0
24
0.006
1.8
Crimp Tool
Crimp Tool: M22520/2-01
Positioner for Crimp Tool: M22520/2-07
Crimp Contacts are type 22D (needed to set the crimp tool correctly)