Introduction, 2 introduction, Basic specifications – MoTeC Knock OKM User Manual
Page 2
2 Introduction
Introduction
MoTeC’s Knock Modules provide individual cylinder closed loop knock
control, allowing tuners to safely optimise high performance ignition maps.
There is a standalone module compatible with all 'hundred series' ECUs and a
version specifically designed to mount onto an M800 Plug-In ECU. Both
modules work in conjunction with MoTeC’s ECU Manager software (v3.5 and
up)
Standalone Knock Module (SKM)
This module is housed in a robust aluminium casing that can be mounted as
required in any vehicle. It is wired between the ECU and the knock sensor.
Onboard Knock Module (OKM)
This module is fitted onto the board of an M800 Plug-In ECU prior to delivery
and linked to the knock sensor. M800 Plug-In ECUs are available for selected
vehicles. Please check our website at
www.motec.com.au
for details.
Basic Specifications
SKM
OKM
Inputs
y
Knock sensor input
y
Knock window input
y
Power supply 8 V
Outputs
y
Knock sensor out
y
Audio
y
Audio
Physical
y
Case size 38 x 90 x 25 mm
excluding connector
y
Weight 100 grams
y
1 x 13 pin Autosport
connector
y
Fitted onto a M800 Plug-In
ECU