Lexibook DJ200BB - Manual (Page 12)

INSTALLING AN OPTIONAL MEMORY CARD
Your Barbie Digital Camera has a built-in SDRAM memory of 32MB.
You may also insert an SD card (not included) to increase the memory
size of the camera. To do so, push the SD card firmly into the slot until
you hear a “click” sound. Please refer to image D located at the back of
the cover page.
The icon will be displayed after inserting an SD card and powering
the unit on.
INSTALLING THE CAMERA DRIVER AND SOFTWARE
Follow these instructions to install the camera driver and application
software on your PC system.
1. Insert the CD Software (included) in your CD-ROM drive. The CD
will auto run, and the installation menu will appear. Click on “Install
Driver”, and then follow the instructions to install it. You will need to
reboot your computer after the driver installation.
Note: If the CD does not auto run, click Start ‡ Run, type in
“D:“autorun.exe” in the Run dialog text box (where D:\ is your CD-ROM
drive).
2. Proceed similarly to install the PhotoImpression and
VideoImpression software. These software offer many photo and video
applications.
Notes:
- You must install the driver before downloading files from the camera.
- Do not connect the video camera to your PC during the software
installation.
- You can click on “Browse CD” to read the user guides of the Photo-
Impression and VideoImpression software. If you cannot read the files,
you will have to install Acrobat Reader first.
TURNING THE CAMERA ON AND OFF
Press the Power button [1] for 3 seconds to turn the video camera ON.
Press and hold the Power button [1] for three seconds to turn the
camera OFF.
Note: The camera will auto power off after 60 seconds of inactivity.
SHOOTING VIDEO CLIPS
1. Turn the video camera ON; and make sure it is set to video shooting
mode. The icon is displayed in the upper left corner of the screen.
2. Hold the video camera firmly and lift the LCD screen [8] open.
3. Press the Shutter button [7] to start shooting. The duration of the
video clip is displayed on the lower right corner of the LCD screen.
4. Press the Shutter button [7] again to stop shooting.
TAKING PHOTOS
1. Turn the video camera ON. Press MODE once to enter photo taking
mode. The icon is displayed in the upper left corner of the screen.
Otherwise, press the MODE key until the icon is displayed.
2. Hold the video camera firmly and lift the LCD screen [8] open.
3. Press the Shutter button [7] to take a photo.
PLAYBACK MODE
1. Turn the video camera ON. Press MODE twice to enter playback
mode. The icon is displayed in the upper left corner of the screen.
2. The number of video clips/pictures taken is indicated on the lower
left side of the screen.
3. Press the up arrow key [4] to view the previous photo or video.
Press the down arrow key [5] to view the next photo or video.
ENGLISH
12