Lexibook DJ025 Series User Manual

Page 10

ENGLISH

TURNING THE CAMERA ON AND OFF

Press the Power button (8) for about 3 seconds to turn the camera on. The

camera will sound a beep to confirm that it is ready for use. Press and hold

Power button (8) for about 3 seconds again to turn it off.

Note: The camera will auto power off after 60 seconds of inactivity.

SELECTING THE PHOTO RESOLUTION

There are 2 resolution modes:

High resolution: the camera can store about 48 pictures in this mode.

Low resolution: the camera can store about 186 pictures in this

mode.

1. Press the Menu button (8) three times to see what kind of resolution setting is

selected on your camera.

2. Press the Shutter button (1) once within 3 seconds to change the resolution.

3. Repeat steps 1 and 2 to modify the resolution again.

FLASH FUNCTION

Switch on the camera.

A Auto Flash

1. Press the Menu button (8) until the

A icon appears on the lower left

the window and go back to the installation

menu. Now you can install the camera

driver.

2. Click “Install Driver”, and then follow the

instructions to install the camera driver.

3. You will need to reboot your computer

after the driver installation. The “Dual

Mode Camera” driver allows you to use

your digital camera as a webcam.

Note:

• If the CD does not auto run, click “Start”, “Run”, then type in “D:\autorun.

exe” in the Run dialog text box (where D:\ is your CD-ROM drive) and press

Enter.

• You must install the driver before downloading pictures/videos from the

camera or using it as a webcam.

• Make sure the camera is not connected to your computer before installing

the driver and the software.

• When launching the “PhoTags Express” software for the first time, a

registration dialog box is displayed on-screen. You can choose to register the

program, skip the registration process or to stop displaying this dialog

box again.