Envizen V100M User Manual

Page 4

indicating lamp of the device is in high light blue color, the desktop
icon of the battery keep rolling which shows it is connected to
the device.

1.2. Switch input methods
The device support handwriting, number, letter, pinyin etc.
switching follow:
Click any text input area of the working program interface, it will
popping input keyboard interface, as shown below:

Press , then it will popping Input Method switch interface.Select
the input method you want here.
[Noted] After newly install input method, you should
Settings>Language & input>KEYBOARD & INPUT METHODS,
then you can use.

1.2. Use T-Flash card
●

Insert T-FLASH card

Insert the T-Flash card into the slot in direction of the devices
bottom shell until you hear a sound of click.
●

Browse files in the memory card

In this MID device，you can view and use the needed files in
catologue of MENU>File manager> SD Card.
●

Remove T-Flash card

Close all open files from the T-Flash, then enter MENU>SE-
TTINGS>TF card and & device storage, click Unmount SD card
,System will prompt that TF card was removed safely. Tap with
your fingertips to the pop-up T-Flash Card
[Note]
1. Do not insert the T-F card by force, this card can only be applied
in one direction.
2. Do not remove the TF card before Unmounted it, or the card may
be damaged.

1.2.2 Unlock the screen

1.2.3 Lock the screen

1.2.4 Switch OFF

1.2. Battery charging

Please press and drag the icon to the , then the LCD will
unlocked automatically.

When the device is in the ON mode, press the POWER key shortly,
the system will lock the screen and enter the save power mode.
Then the screen is OFF but the system will still operation.

When the device is in the ON mode, press and hold the POWER
key for 3 seconds, the screen will display the power off interface,
choose the power off item to confirm, the system will shut
automatically.

Insert the micro port of the battery adaptor into 220V AC slot on the
device, and connect the other side with the power socket. Then,yo-
u can charge the device.
[Note] This device is not recommended to use USB interface to ch-
arge, please must use the special power adapter for charging.Yo-
u should charge the battery for at least -

hours to make sure the

battery is fully charged at the first time. On charge the Power

8 12