beautypg.com

Backplane and led board wiring – Chenbro RM51424 LED Board(80H033215-003 Rev. 1.1~1.2), For 3Gbps SATA Backplane - Manual User Manual

Page 8

background image

8

LED Board 80H033215-003 ver. 1.1~1.2
User’s Manual

15Fl., No.150, Jian Yi Road, Chung Ho City, Taipei Hsien, Taiwan R.O.C.,

Tel: +886 2 82265500 Fax: +886 2 82265392 Email: [email protected]

www

.chenbr

o.com

Backplane and LED Board Wiring

1. Use 4 pcs of SATA-II cable per backplane for HOST to Backplane connection.

2. For the Fan connectors, connect the system middle Fan (3P3C) to the Backplane.

3. For the Fail LED output, connect the attached cable from RAID card (only if failure LED output is

supported) to Backplane (CN2).

Wiring of SAS / SATA-II BP (2U~4U)