BVA Hydraulics PA7550 - Manual (Page 2)

2
Save these instructions. For your safety, read and
understand the information contained within. The owner and
operator shall have an understanding of this product and safe
operating procedures before attempting to use this product.
Instructions and safety information shall be conveyed in
the operator's native language before use of this product
is authorized. Make certain that the operator thoroughly
understands the inherent dangers associated with the use and
misuse of the product. If any doubt exists as to the safe and
proper use of this product as outlined in this factory authorized
manual, remove from service immediately.
Figure 1 - Model PA7550 Components
!
!
Inspect before each use. It is recommended that, prior
to each use, an inspection be done by qualified personnel
and that any missing or damaged parts, decals, warning/
safety labels or signs be replaced with BVA Hydraulics
authorized replacement parts only. Any pump that appears
to be damaged in any way, is worn, leaking or operates
abnormally shall be removed from service immediately until
such time as repairs can be made. Any pump that has been
or suspected to have been subject to a shock load (a load
dropped suddenly, causing the system pressure to exceed
10,000 PSI), shall be removed from service immediately until
checked out by a BVA Hydraulics authorized service center.
Owners and operators of this equipment shall be aware that
the use and subsequent repair of this equipment may require
special training and knowledge.
PRODUCT DESCRIPTION
BVA Hydraulics Air Hydraulic Pumps are engineered to
meet most Industrial Standards for Performance and Safety.
Its unique hydraulic circuit allows quick displacement of
hydraulic fluid under no load conditions and easy pumping
in loaded conditions. These air actuated pumps supply
compressed hydraulic fluid to compatible applications
i.e. rams, presses, spreaders, compactors and crimping
machines, anywhere that 10,000 PSI of fluid pressure
is needed. Special skill, knowledge and training may
be required for a specific task and the product may not
be suitable for all the jobs described above. Unsuitable
applications would include applications that call for a device
to move, level or support persons, animals, hazardous
materials, mobile homes/ dwellings in general, mirrors
and/or plate glass, and/or to connect/secure hatches,
components, etc. between bulkheads. The user must
ultimately make the decision regarding suitability of the
product for any given task and assume the responsibility of
safety for himself or herself and others in the work area.
WARNING: To reduce the risk of personal injury
and/or property damage, ensure that the rated working
pressure of each pressurized attachment be equal to or
greater than the rated working pressure developed by the
hydraulic pump.
Always check connections before using. Alteration
of these products is strictly prohibited. Use only those
adapters and attachments provided and approved by the
manufacturer.
Reservoir
Manifold Plug/ Oil Output Port
(not shown)
Plastic Cap/ Air Input Port
Foot Pedal
Shipping / Air Vent Plug (not shown)
Replace Shipping Plug with Air Vent
Plug prior to use