Brickcom Software Users Manual For Firmware release V3.2.x.x - Manual (Page 28)

- 27 -
3. PPPoE (Point-to-point over Ethernet): Use this mode if connecting to the Internet
through a DSL Line. NOTE - To utilize this feature, it requires an account provided
by an Internet Service Provider. Enter the user name and password provided by the ISP.
Click Apply to apply settings or Cancel to cancel changes.
4. 3G(*)(3G Series Only)
– Use this option if using a 3G SIM card to transmit video/audio
surveillance over a 3G network
NOTE - This function is only available for GOB models.
a. Enter the APN (Access Point Number), Dial Number, PIN Code, User Name and
Password provided by the ISP.
b. Click Apply to apply the settings. The message below will be displayed if the 3G
settings were successfully applied.