BlueBird Kaydee Kaddy - Manual (Page 21)

21
5. Attach tow handle, Part # 2719, to Kaddy frame
using: 5/16-18NC x 1 3/4” long hex head cap
screw, washers and lock nut. (See Figure 5.)
INSTRUCTIONS
KAYDEE KADDY ASSEMBLY
FIGURE 5
STORING LIFT
It is easier to load if you put the pieces in the Kaddy
in the following order:
1. Start with the cross-axle. Be sure the boot for
the column post is put to the rear of the Kaddy.
2. Put the two legs in the rear sockets.
3. Put the boom in the socket on the right side.
4. Put the column post in the left socket. Be sure
that the maneuvering handle is on the outside
and lined up front to rear.
5. Put the jack on the front mounting retainer and
lean it back into the support cradle.
6. To hold the pieces together, hook one end of
rubber rope on the rear handle and bend the
hook so that it won’t come loose. Pull the other
end around the pieces and hook on the other
side of the rear handle.
CROSS AXLE
COLUMN POST
BOOM
LEGS