BlueBird Kaydee Kaddy - Manual (Page 20)

20
1. Attach handle Part # 2718 to Kaddy frame us-
ing: 5/16-18NC x 1 1/2” long hex head cap
screws, washers and lock nuts. Place washer
on cap screw, insert screw into handle and
through frame bracket, add flat washer and hex
lock nut and tighten. (See Figure 1.)
INSTRUCTIONS
KAYDEE KADDY ASSEMBLY
3. Attach rear wheel, Part # 5053, to Kaddy frame
using: 5/8-16 x 4” long hex head cap screws,
washers and jam nuts. Insert hex head cap
screw into wheel. Screw on hex jam nut until
finger tight. Add flat washer to screw. Insert
wheel assembly into large hole in handle
bracket. Add another flat washer and hex jam
nut next to wheel and tighten. (See Figure 3.)
FIGURE 1
2. Attach front caster wheels, Part # 0044, to
Kaddy frame using: 3/8-16NC x 3/4” long car-
riage bolts, washers and lock nuts. (See Fig-
ure 2.)
FIGURE 2
FIGURE 3
4. Attach jack support, Part # 2709, to Kaddy
frame using: 5/16-18NC x 1” long hex head cap
screws, washers and lock nuts. Make sure top
opening of support is pointed to front. (See Fig-
ure 4.)
FIGURE 4