Avision AV360C - Manual (Page 25)

6-2
6.1 Questions and Answers
Question: Why is it the scanned image always comes out
too dark?
Answer: 1) Modify the Gamma setting to 1.8 for your
monitor and, when printing, set Gamma to
2.2 for your printer.
2) Use the Brightness setting of the TWAIN
user interface to get a brighter image.
Question: The scanning speed of my scanner is much
slower than that of those installed at other
computers. Can I speed it up?
Answer: In such case, please
a) Set you PC printer port to the EPP mode
from BIOS setting, or,
b) Add Avision scanner interface card to scan
at a higher speed.
Question: Why does my scanner scan at a very low speed?
Answer:
If you have installed “Works for Windows,” it
will install Window Printing System (WPS) in
your WIN.INI file. This will take up the printer
port time remarkably. You can remove the WPS
from your WIN.INI file, as follows:
From:
[MS Text Converters]
MSWorksWin=Works for Windows 2.0,C:\WINDOWS\MSAPPS\TEXTCONV\worksdos.cnv, wps
Works for Dos 2.0=Works for DOS 2.0 MSAPPS\TEXTCONV\workswin.con, wps