Indesit VIA 640 C - Manual (Page 24)

24
GB
Installation
! Before operating your new appliance please read this
instruction booklet carefully. It contains important information
concerning the safe operation, installation and maintenance
of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to any new owners of the appliance.
Positioning
! Keep all packaging material out of the reach of children. It
may present a choking or suffocation hazard ( see Precautions
and tips).
! The appliance must be installed by a qualified professional in
accordance with the instructions provided. Incorrect
installation may cause harm to people and animals or may
damage property.
Built-in appliance
Use a suitable cabinet to ensure that the appliance functions
properly.
• The supporting surface must be heat-resistant up to a
temperature of approximately 100°C.
• If the appliance is to be installed above an oven, the oven
must be equipped with a forced ventilation cooling system.
• Avoid installing the hob above a dishwasher: if this cannot
be avoided, place a waterproof separation device between
the two appliances.
• Depending on the hob you want to install, the cabinet must
have the following dimensions ( see figure):
560 +/- 1
490 +/- 1
53
590
520
Ventilation
To allow adequate ventilation and to avoid overheating of the
surrounding surfaces the hob should be positioned as follows:
• At a minimum distance of 40 mm from the back panel or
any other vertical surfaces.
• So that a minimum distance of 20 mm is maintained
between the installation cavity and the cabinet
underneath.
• Kitchen cabinets adjacent to the appliance and taller than
the top of the hob must be at least 600 mm from the edge
of the hob.
F i x i n g
The appliance must be installed on a perfectly level supporting
surface.
FRONT SIDE
OF HOB
SUPPORTING
SURFACE
30
40
UNDERSIDE
OF HOB
5 mm
min. 20 mm
min. 20 mm
min. 40 mm
COMPARTMENT
5 mm
min. 40 mm
FAN-ASSISTED
OVEN