Aputure Battery Grip Compatible With Nikon D800_D800E - Manual (Page 9)

1
Caution
This product should only be used with
compatible devices specified in this
instruction.
1.
3.
Cover the power terminals with the
contact cap when not in use.This
prevents electrical shorts caused by
metal objects touching the terminals.
7. The battery level may not display properly
if batteries are inserted before attaching
the grip to camera.
8.
Remove batteries from the grip when not in
use for an extended period.
9.
Do not disassemble or repair this product
yourself, any problem or accident caused
is not in warranty.
10. Avoid water or extreme humidity and keep
in a dry and cool place.
11.
Do not dispose of in fire or extremely high
temperature environment.
12. Keep the product or parts away from
children, in case of swallowed by mistake.
2.
Only use with batteries and battery
holders recommended
When the battery holder is removed
from the grip, remove the batteries
or place the holder in a container to
prevent electrical shorts caused by
contact with other metal objects. 4.
The memory card access lamp may
light up when this grip is mounted or
removed from the camera. This is
par t of the normal operation. 5.
The control lock is not a power switch; use
the camera power switch to turn the power
on/off. 6.
Part Names
2
Contact cap
Holder for camera contact cover
Power/signal contacts
AF-ON button
Main command dial
Multi selector
Attachment wheel
Holder power connector cover
Battery-chamber
cover
Battery chamber
Battery-chamber
latch
Mounting screw
BP-D12( D800)- -
Thursday, October 25, 2012 2:28:49 PM