Antex Electronics Sirius Triple Play - Manual (Page 10)

10 Antex Electronics
© 2003 Antex Electronics, Inc.
Skipping Channels
In the course of using TriplePlay you may find that there are
specific channels you prefer not to listen to and would rather
skip over. Using TriplePlay’s SKIP feature, you can program the
unit to skip over these channels when scrolling using the
CHANNEL up/down buttons or remote control. (Note that you
can still access the “skipped” channels using the direct tune
method.)
To configure a channel to be skipped when scrolling:
1. Press and hold the POWER button to enter SETUP mode.
2. Press the CHANNEL down button to highlight “ADD OR SKIP,”
and then press the SELECT button. A screen similar to that
shown below appears.
70 Planet Jazz SKPd
ADD or SKIP
ZONE 1
SRX-3 TriplePlay
Press SEL to Return
UP/DN to select Channel
LF/RT to change Status
Zone to change Zone
— Use the CHANNEL up/down buttons to scroll to the
channel you want to skip (or add back a currently
skipped channel).
— Use the CATEGORY left/right buttons to toggle the status
between skipped “SKPd” and not skipped “NRML”.
3. Add and Skip as many channels as you prefer. When
finished, press the SELECT button to return to the default
display.
Displaying SIRIUS ID Numbers
After initial activation it is unlikely that you will need to access
the SIRIUS ID numbers again. If you do, please follow the
instructions below.
1. Press and hold the POWER button to enter SETUP mode.
2. Press the CHANNEL down button to highlight “SIRIUS ID
NUMBERS,” and then press the SELECT button. A screen
similar to that shown below appears.
ZONE 1: 000092733123
ZONE 2: 000092736724
ZONE 3: 000092737831
SIRIUS ID NUMBERS
SRX-3 TriplePlay
Press SELECT to Return
ZONE 1: 000092733123
ZONE 2: 000092736724
ZONE 3: 000092737831
SIRIUS ID NUMBERS
SRX-3 TriplePlay
Press SELECT to Return
3. Press the SELECT button to return to the default display.