Antex Electronics DMX-88 USB Recording Mixer - Manual (Page 9)

DMX-88 USB Mixer User Manual
9
Installing the Software
Before you can use the DMX-88, you must install the software on the host computer. This includes the "driver" and the DMX-88 Antex
Configuration Program. Note that only an ASIO driver is available and you must have recording software that works with ASIO
devices. There is no WDM driver, and the DMX-88 will not appear as a recording or playback device in Windows Control Panel ->
Sounds.
The operating systems supported are Windows XP, Vista and 7, 32 and 64 bit. Software installation is fairly straightforward, using an
executable installation program available from the Antex web site, www.antex.com, in the 'Downloads" section. The installation
program for 32 bit operating systems is DMX88Mixer32.exe and the program for 64 bit operating systems is DMX88Mixer64.exe.
Run the installation program before connecting the DMX-88 to the host computer. If you connect the DMX-88 first, Windows
will unsuccessfully try to find a driver. When you run the installation program, first you will see: