American Expedition Vehicles JK CORDURA Front Seat Covers - Manual (Page 4)

3
REAR Seats
Driver-side and passenger-side bottoms
Pull cover into place around seat cushion and
tuck the tail flap (A) between bottom cushion and
backrest.
Feed the wide velcro straps (B) under seat and
attach to the tail flap behind the seat.
Feed thin velcro straps (C) under seat and secure
to the velcro on the tail flap.
Smooth cover over seat with your hands and
refasten velcro to tighten. Trim excess velcro if
desired.
Driver-side and passenger-side Backs
Pull cover into position with velcro straps in front. Feed top flaps (A) under and around headrest.
Attach the velcro closure down the back and connect the straps from flaps (A) inside the back to the
receiving velcro (B).
Feed bottom flap (C) between seat and back cushions. Attach velcro closure down the back and connect
the straps from flap inside the back to the receiving velcro.
Smooth cover to eliminate wrinkles and refasten velcro to tighten.
A
B
C
C
A
C
A
B
front view rear view
! IMPORTANT NOTE !
2007 and 2013 models require
modification to the outer shoul-
der. Turn inside out and cut out
the square marked and noted
“CUT HERE”.