American Expedition Vehicles JK Differential Cover - Manual (Page 2)

PLEASE READ BEFORE YOU START
TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND READING THESE INSTRUCTIONS
THOROUGHLY BEFORE BEGINNING ANY WORK. THESE INSTRUCTIONS ASSUME A CERTAIN
AMOUNT OF MECHANICAL ABILITY AND ARE NOT WRITTEN NOR INTENDED FOR SOMEONE NOT
FAMILIAR WITH AUTO REPAIR.
ii
This product is covered under the AEV Parts Limited Warranty, a copy of which can be found at aev-conversions.com/warranty.
INCLUDED PARTS QTY REQUIRED TOOLS
Differential Cover 1 Common Hand Tools
Fill Plug 1 Torque Wrench
O-Ring 1 Thread Tape
Fill Level Plugs 2 Allen Wrenchs
Socket Head Cap Screws 10
Alcohol Swab 1
AEV Badge 1
Caution
The adhesive properties of the AEV Bison badge is very strong. Once the protective cover is removed from
the back side of the badge and it is placed on an object, it will not come off without permanently damag-
ing it and/or the surface it comes in contact with.
Caution
The AEV logo badge is resistant to most petroleum based oils, greases and aliphatic solvents and resis-
tant to mild acids, alkalis and salt solutions. However, AEV recommends cleaning the AEV logo badge and
surrounding area after any contact with the above mentioned materials immediately. To clean, use warm
soapy water and a non-abrasive sponge, rinse with low pressure water. Use of a high pressure sprayer is
not recommended in this area closer than 5 feet.