Aeromotive 13351 - PLATINUM SERIES UNIVERSAL BYPASS REGULATOR - Manual

AEROMOTIVE Part # 13301 & 13351
INSTALLATION INSTRUCTIONS
CAUTION:
Installation of this product requires detailed knowledge of automotive
systems and repair procedures. We recommend that this installation be carried
out by a qualified automotive technician.
Installation of this product requires handling of gasoline. Ensure you are
working in a well ventilated area with an approved fire extinguisher nearby.
Extinguish all open flames, prohibit smoking and eliminate all sources of ignition
in the area of the vehicle before proceeding with the installation.
When installing this product, wear eye goggles and other safety apparel as
needed to protect yourself from debris and sprayed gasoline.
WARNING!
The fuel system is under pressure. Do not open the fuel system until the
pressure has been relieved. Refer to the appropriate vehicle service manual for
the procedure and precautions for relieving the fuel system pressure.
NOTE: Testing the enclosed regulator by applying air pressure or vacuum to the vacuum port with a hand-
held pump will yield poor results, due to the slight air leakage through the adjustment screw threads. This
minute leakage, which is typical of all adjustable fuel pressure regulators, does not, in any way, affect the
performance of the regulator.
The enclose Aeromotive regulator utilizes four 3/8 NPT pipe thread inlet/outlet ports and one 3/8-
NPT pipe thread bypass port. In order to use the enclosed regulator in your vehicle’s fuel system,
you must install the necessary adapter fittings, high pressure fuel lines and/or fuel injector rails to
adapt your system to the configuration and ports of this regulator. The following instructions
assume that your fuel system has already been configured for use with this regulator.
Aeromotive system components are not legal for sale or use on emission controlled motor vehicles.
Performance Specifications: Model 13301
Outlet Fuel Pressure, adjustable 3-20 psi low pressure spring (installed from factory)
20-65 psi high pressure spring
Max Pump Flow Rate 250 GPH
Inlet / Outlet ports 4ea. 3/8-NPT
Bypass port (located at bottom of regulator) 1ea. 3/8-NPT
Fuel Compatibility Gasoline only