Aeromotive 14124 - 05-09 4.6L 3-VALVE GT FUEL RAIL SYSTEM - Manual (Page 6)

Hose and Fitting Assembly
CAUTION:
When assembling this product, wear eye goggles and other safety apparel
as needed to protect yourself from debris and sharp edges.
A. Wrap hose with masking tape at desired cutoff length. Cut hose through masking tape squarely to
desired length using a cut-off machine or a fine tooth hacksaw. Remove the masking tape.
B. Unthread the hose socket from the rest of the hose end fitting.
C. Insert hose in the socket with a twisting and pushing motion until the hose is fully seated in the
socket.
D. Using a grease pencil, marker or tape, mark the location of the hose in relation to the hose socket
which you just installed.
E. Using a light oil lubricate the inside of the hose and the hose end mating parts.
F. Carefully thread the hose end onto the hose socket, making sure that the hose does not push out of
socket, by observing the mark you placed on the hose in step D.