beautypg.com

Aeromotive 14139 - 98-02 GM LS1 F-BODY FUEL RAIL SYSTEM User Manual

Page 3

background image


17. Thread the o-ring side of each two AN-08 /AN-06 reducer fittings in the rear of each fuel rail.

18. Connect each of the two AN-06 90-Deg hose ends to the rear of each fuel rail. Plan a route between

the two hose ends, measure the lengths of fuel line needed. See section titled Hose and Fitting
Assembly for fuel line assembly instructions. Once the hoses are assembled, ensure there is no
debris in the hose
and install them

19. Thread the o-ring side of each two AN-08 cutoff tapered flare fittings in the front of each fuel rail.