Aeromotive 14142 - GM LS7 FUEL RAIL KIT - Manual (Page 3)

Thanks for purchasing another quality product designed, engineered and manufactured in
Kansas City, USA!
AEROMOTIVE, INC.
7805 Barton Street, Lenexa, KS 66214
913-647-7300 fax 913-647-7207
www.aeromotiveinc.com
15. Carefully place each of the fuel injectors in the corresponding fuel injector bore of the
Aeromotive fuel rails.
16. Place each of the fuel rail / injector assemblies onto the lower intake manifold, ease the
fuel injectors into the injector bores in the lower intake being careful that the injector
does not dislodge itself from the fuel rail.
The rear of the fuel rails may contact a small bracket attached to the back lower
intake. This bracket may require modification for clearance or removal.
17. Reinstall the fuel rail mounting bolts and tighten.
18. Using high pressure fuel lines and fittings, plumb the remainder of the fuel system.
Ensure the any spilled gasoline and any gasoline soaked shop towels are cleaned up and
removed from the vicinity of the vehicle!
19. Reinstall any vacuum or dry sump lines that where removed for the original fuel rail
removal. The dry sump line on the front of the passenger or right side of the vehicle may
need heated and formed to clear the Aeromotive fuel rails. Take caution when heating
and forming this line as it may contain residue oil.
20. Reconnect the battery and turn the ignition to the ON position WITHOUT starting the
car. After several second turn the ignition key to the OFF position, wait one minute.
Repeat this process until you pressurize the fuel system.
21. With fuel pressure in the system, check for leaks from and around all the fuel system
components and all fuel lines and connections. If any fuel leaks are found, turn the
ignition key to the OFF position, remove any spilled gasoline and repair the leak before
proceeding.
22. Once the fuel system has been confirmed to be leak free, test drive the vehicle to insure
proper operation and re-check the fuel system for leaks. If any leaks are found,
immediately shutoff the engine and repair the leak(s).