Aeromotive 14148 - EDELBROCK SBC VICTOR E FUEL RAIL KIT - Manual (Page 3)

Thanks for purchasing another quality product designed, engineered and manufactured in
Kansas City, USA!
AEROMOTIVE, INC.
7805 Barton Street, Lenexa KS 66214
913-647-7300 fax 913-647-7207
www.aeromotiveinc.com
19. With the fuel pressure gauge registering fuel system pressure, check for fuel leaks from and
around all the fuel system components and all fuel lines and connections! If any fuel leaks are
found, turn the ignition key to the OFF position, remove any spilled fuel and repair the leak
before proceeding!
20. Once the fuel pressure gauge registers fuel system pressure and there are no fuel leaks, start the
engine and adjust the regulator to the desired fuel pressure.
21. Once the desired fuel pressure is achieved, tighten the regulator adjustment jam nut and attach the
vacuum line.
22. Turn off the engine and allow it to cool.
23. Test drive the car to insure proper operation and re-check the fuel system for leaks. If any leaks are
found, immediately shutoff the engine and repair the leak(s)!