Aeromotive 11110 - MARINE ELIMINATOR FUEL PUMP User Manual
Page 3
Note: If you would like a fuel shut off valve installed between the fuel tank outlet and the fuel pump. Use
Aeromotive part # 12332 shutoff valve fuel filter in place of the 12302 fuel filter.
7. Connect the fuel pump outlet to the vehicle’s fuel rails in the engine compartment. Make sure you use high pressure
(200 psi minimum) fuel line for this connection!
Note: Be sure to route all electrical wires clear of any moving suspension or drivetrain components and any
exhaust components! Protect wires from abrasion and road obstructions or debris.
8. There are several ways to connect electrical power to the pump, depending on your fuel injection system. Make sure
you use stranded, insulated copper wire, in the sizes shown, with matching crimp-type connectors for all connections.
9. Attach the OEM fuel pump wires, the aftermarket ECM fuel pump wires or your fuel pump switch wires as shown in the
following diagram.
10. Attach a suitable fuel pressure gauge (part # 15633 for EFI and 15632 for Carb) to the fuel system schrader valve,
fuel rail or fuel pressure regulator.