ABUS TVIP62500 - Manual (Page 66)

66
5.3 Image Settings
Brightness:
Brightness of the video image.
Saturation: Saturation of the video image.
Contrast: Contrast of the video image.
Sharpness: Sets the sharpness of the video image. A higher sharpness value increases the noise
in the video image.
Exposure:
Auto: The exposure time is set automatically, regardless of the network frequency.
Auto 50 Hz: The exposure time is set automatically. The basic parameters are
optimised for a 50 Hz network frequency.
Auto 60 Hz: The exposure time is set automatically. The basic parameters are
optimised for a 60 Hz network frequency.
Manual 50 Hz: The exposure time can be set manually. The basic parameters are
optimised for a 50 Hz network frequency.
Manual 60 Hz: The exposure time can be set manually. The basic parameters are
optimised for a 60 Hz network frequency.
White Balance: Auto: The white balance is set automatically (range: 2,000– 9,500 K).
R-gain: Red value setting for manual white balance.
B-gain: Blue value setting for manual white balance.
Night Mode:
Auto: The camera switches automatically into night mode (below ~3 lux).
On: The camera is set to night mode. The IR swivel filter is separated from the image sensor.
Off: The camera is set to day mode. The IR swivel filter is positioned in front of the
image sensor.
AGC: Manual setting of the maximum gain value on the image sensor.
Rotation: Flip: Vertical mirroring of video image.
Mirror: Horizontal mirroring of video image.
IR Light Intensity: Auto: The IR intensity is regulated automatically by the camera depending on the
ambient lighting conditions.
Fixed: Defines the IR intensity value.
Level:
The IR intensity can be set on 10 levels. To deactivate the IR LEDs, set this value
to 0 – the function of the IR swivel filter (ICR) for day/night switching remains in place
(e.g. use of an external IR illuminator).