ABUS TVHD51000 - Manual (Page 30)

30
This value must be set at a higher level than the “NIGHT TO DAY”
value (value is proportional to the amplifier control).
NIGHT TO DAY 0~151
This value must be set at a lower level than the “DAY TO NIGHT”
value (value is proportional to the amplifier control).
DELAY TIME 1~60
A delay time can be set between identifying and applying the
required day/night switching (value in seconds)
B/W OFF: Colour saturation is activated permanently.
ON: Colour saturation is deactivated permanently.
DEFAULT Restores all values in the sub-menu to the factory settings
RETURN Back to main menu
WHITE BALANCE
Function Description
MODE AWB: White balance calculations are dynamically and
continuously performed in the 1.800~10.500 K range.
ATW: White balance calculations are dynamically and
continuously performed in the 2.700~9.500 K range.
INDOOR: The camera tries to set the white balance for artificial
light.
OUTDOOR: The camera tries to set the white balance for natural
light.
PUSH AUTO: This function performs the white balance once
(after activating the “PUSH AUTO” further down).
MANUAL: Manual setting of the white balance.
RED GAIN 0~255
Setting the red value
BLUE GAIN 0~255
Setting the blue value
PUSH AUTO OFF: White balance is not performed
ON: White balance is performed and saved
DEFAULT Restores all values in the sub-menu to the factory settings
RETURN Back to main menu