AAEON FWS-7400 - Manual (Page 101)

N e t w o r k Ap p l i a n c e F W S - 7 4 0 0
Appendix C Standard LAN Bypass Platform Setting C-7
delay100ms();
TmpValue |= (Value << BitNum);
outport(IoAddr, TmpValue);
}
************************************************************************************
************************************************************************************
VOID SET_Value (Word IoAddr, Byte BitNum,Byte Value) { BYTE TmpValue;
TmpValue = inportb (IoAddr);
TmpValue &= ~(1 << BitNum);
TmpValue |= (Value << BitNum);
outport(IoAddr, TmpValue);
}
************************************************************************************
VOID
Main
(){
//Select LAN kit refer to table 1
SET_Value (LAN_ID2, LANID2, UnitVal);
SET_Value (LAN_ID1, LANID1, UnitVal);
SET_Value (LAN_ID0, LANID1, UnitVal);
//Set the PWR_ON parameter
SET_Value (PWR_ON, PWR_ON_R, UnitVal);
//Set the PWR_OFF parameter
SET_Value (PWR_OFF, PWR_OFF_R, UnitVal);
//Set the WDT_EN parameter
SET_Value (PWR_OFF, PWR_OFF_R, UnitVal);
//Active LAN Bypass setting