AAEON IMBM-H61B - Manual (Page 41)

Chapter 3: BIOS setup 3-11
Primary IGFX Boot Display [Auto]
Select the integrated display device which is activated during POST. Your selection
does not take effect if you have installed an external graphics device. Secondary
boot display selection will appear based on your selection. VGA modes can be
supported only on the primary display. Configuration options: [Auto] [CRT] [DVI]
[LVDS]
CH7511B Backlight Control Mode [DC Mode]
Allows you to select CH7511B Backlight Control mode. Configuration options: [DC
Mode] [PWM Mode]
Backlight Brightness Setting [75]
Allows you to set the backlight brightness. Select a larger number for a brighter
backlight. Configuration options: [0] [25] [50] [75] [100]
3.4.8 Onboard Devices Configuration
HD Audio Controller [Enabled]
[Enabled]
Enables the High Definition Audio Controller.
[Disabled] Disables the controller.
Realtek LAN1 Controller [Enabled]
[Enabled]
Enables the Realtek LAN controller 1.
[Disabled] Disables the controller.
Realtek LAN1 PXE OPROM [Disabled]
This item appears only when you set the Realtek LAN1 Controller item to
[Enabled] and allows you to enable or disable the PXE OptionRom of the Realtek
LAN controller 1. Configuration options: [Enabled] [Disabled]
Realtek LAN2 Controller [Enabled]
[Enabled]
Enables the Realtek LAN controller 2.
[Disabled] Disables the controller.
Realtek LAN2 PXE OPROM [Disabled]
This item appears only when you set the Realtek LAN2 Controller item to
[Enabled] and allows you to enable or disable the PXE OptionRom of the Realtek
LAN controller 2. Configuration options: [Enabled] [Disabled]
Serial Port 1-9 [Enabled]
Allows you to enable or disable serial ports (COM) 1-9. Configuration options:
[Enabled] [Disabled]
RS Mode [RS232]
Allows you to configure the serial communications standard of serial port (COM) 4.
Configuration options: [RS232] [RS422] [RS485]