5 usb configuration, 6 sio gpio, 7 ch7511b panel controller – AAEON IMBM-H61B User Manual
Page 40: Usb configuration -10, Sio gpio -10, Ch7511b panel controller -10
3-10
IMBM-H61B
consumption for iGPU while the system is idle. Configuration options: [Disabled]
[Enabled]
iGPU Multi-Monitor [Disabled]
Allows you to enable or disable iGPU Multi-Monitor support for add-on graphics
devices. The iGPU shared memory size will be fixed at 64MB. Configuration options:
[Disabled] [Enabled]
3.4.5
USB Configuration
The items in this menu allow you to change the USB-related features.
NOTE: The USB Devices item shows the auto-detected values. If no USB
device is detected, the item shows None.
Legacy USB Support [Enabled]
[Enabled]
Enables the support for USB devices on legacy operating systems
(OS).
[Disabled]
The USB devices can be used only for the BIOS setup program.
[Auto]
Allows the system to detect the presence of USB devices at
startup. If detected, the USB controller legacy mode is enabled. If
no USB device is detected, the legacy USB support is disabled.
EHCI Hand-off [Disabled]
[Enabled]
Enables the support for operating systems without an EHCI
hand-off feature.
[Disabled]
Disables the function.
3.4.6
SIO GPIO
GPIO 50~57 [Input]
Allows you to configure the digital signal of the GPIO (General Purpose Input/
Output) pins 50~57. Configuration options: [Input] [Output High] [Output Low]
3.4.7
CH7511B Panel Controller
CH7511B Panel Type [1024x768 18Bit LVDS]
Allows you to configure CH7511B panel used by Internal Graphics Device.
Configuration options: [1366x768 18Bit LVDS] [1024x768 18Bit LVDS] [1024x768
24Bit LVDS] [1280x1024 48Bit LVDS] [1600x1200 48Bit LVDS] [1280x768 18Bit
LVDS] [1280x768 24Bit LVDS] [1366x768 24Bit LVDS] [1444x900 48Bit LVDS]
[1920x1080 48Bit LVDS] [1280x1024 18Bit LVDS] [1280x1024 24Bit LVDS]