AAEON IMBI-Q45 User Manual

Page 33

I n d u s t r i a l M o t h e r b o a r d

I M B I - Q 4 5

Chapter4 Drivers Installation

4-5

Note: For Windows Vista you can use Floppy, CD/DVD or USB.

-----------------------------------------------------------------------------------------

Important

Please follow the instruction below to make an “Intel

RAID Driver”

for yourself.

1. Insert the AAEON CD into the CD-ROM drive

2. Click the “Browse CD” on the Setup screen

3. Copy all the contents in \\Step5 - RAID\F6 Install

Floppy\32bit or 64bit to a formatted floppy diskette

4. The driver diskette for Intel

ICH10DO RAID Controller is

done

-----------------------------------------------------------------------------------------

For Windows Vista:

During the Operating system installation, after selecting the

location to install Vista click on “Load Driver” button to install a

third party SCSI or RAID driver.

When prompted, insert the floppy disk or media (Floppy,

CD/DVD or USB) you created in step 3 and press Enter.

You should be shown a list of available SCSI Adapters. This

list should include “Intel(R) ICH8R/ICH9R/ICH10R/DO SATA

RAID Controller” when the system is in RAID mode and

“Intel(R) ICH10D/DO SATA AHCI Controller” when the system

is in AHCI mode.

Select the appropriate Intel RAID controller and press

ENTER.