AAEON IMBI-Q45 - Manual (Page 32)

I n d u s t r i a l M o t h e r b o a r d I M B I - Q 4 5
Chapter 4 Driver Installation 4-4
2. Double click on .exe file located in each OS folder
3. Follow the instructions that the window shows
4. The system will help you to install the driver automatically
Step 5 – Install RAID Driver
1. Click on the Step 5-RAID folder and select the OS your
system is
2. Double click on .exe file located in each OS folder
3. Follow the instructions that the window shows
4. The system will help you to install the driver automatically
Install Driver in Windows Vista / XP / 2000
New Windows Vista / XP / 2000 Installation
The following details the installation of the drivers while installing
Windows XP/ 2000.
1. When you start installing Windows XP and older operating
systems, you may encounter a message stating, “Setup could
not determine the type of one or more mass storage devices
installed in your system”. If this is the case, then you are
already in the right place and are ready to supply the driver. If
this is not the case, then press F6 when prompted at the
beginning of Windows setup.
2. Press the “S” key to select “Specify Additional Device”.
3. You should be prompted to insert a floppy disk containing the
Intel
®
RAID driver into the A: drive.