AAEON EMB-Q77A - Manual (Page 55)

3-19 Chapter 3: BIOS setup
PS/2 Keyboard and Mouse Support [Auto]
[Auto]
Automatic configuration.
[Disabled] Disables PS/2 keyboard and mouse support during
POST.
[Full Initialization] PS/2 keyboard and mouse support are enabled during
POST.
Network Stack Driver Support [Disabled]
[Disabled]
The BIOS skips over the Network Stack Driver and
tries to boot from the next device.
[Enabled] Allows the BIOS to boot from the Network Stack Driver.
3.5.2 Bootup NumLock State [On]
[On] Sets the power-on state of the NumLock to [On].
[Off] Sets the power-on state of the NumLock to [Off].
3.5.3 Wait for ‘F1’ If Error [Disabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed
when error occurs. Configuration options: [Disabled] [Enabled]
3.5.4 Option ROM Messages [Force BIOS]
[Force BIOS] The third-party ROM messages will be forced to
display during the boot sequence.
[Keep Current] The third-party ROM messages will be displayed only if
the third-party manufacturer had set the add-on device
to do so.
3.5.5 INT19 Trap Response [Postponed]
[Immediate] Execute INT19 Trap immediately.
[Postponed] Execute INT19 Trap during legacy boot.