GEARENCH LA116 PETOL Bull Tong - Manual (Page 16)

14
Torque and Diameter capacity
The following table lists the maximum working torques and the corresponding handle loads
for the diameter range of the tong.
Diameter
Torque
Arm
Length
(inches)
Maximum
Torque
(foot-pounds)
Maximum
Line Pull
(pounds)
5 41.93 53,800 15,400
5-1/2 42.08 53,800 15,400
6 42.22 53,900 15,300
6-1/2 42.36 53,900 15,300
7 42.51 54,000 15,200
7-1/2 42.65 54,000 15,200
8 42.80 54,100 15,200
8-1/2 42.94 54,200 15,100
9 43.09 54,300 15,100
9-1/2 43.23 54,400 15,100
10 43.38 54,400 15,100
10-1/2 43.52 54,500 15,000
11 43.66 54,600 15,000
11-1/2 43.81 54,700 15,000
12 43.95 54,800 15,000
12-1/2 44.10 54,900 14,900
13 44.24 55,000 14,900
13-1/2 44.39 55,100 14,900
14 44.53 55,200 14,900
14-1/2 44.67 55,300 14,900
15 44.82 55,500 14,800
15-1/2 44.96 55,600 14,800
16 45.11 55,700 14,800
16-1/2 45.25 55,800 14,800
17 45.40 55,900 14,800
WARNING: Under no circumstances should the maximum working load be
exceeded. Overloading may result in injury or death. Always use a load cell or
other calibrated indicating device to monitor the line pull on the tong to avoid an
overload.