Elmo Rietschle F-REL - Manual (Page 19)

19 www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH |
Commissioning and decommissioning
6.3 Decommissioning/ storing
Stop the machine
a) Switch the machine off.
b) If available close the cut off device in the
suction and pressure pipe.
c) Disconnect the machine from the electricity
source.
d) Depressurise the machine: Open the pipes
slowly.
The pressure reduces slowly.
e) Remove the pipes and hoses.
f) Seal the connections for suction and pressure
nozzles using adhesive foil.
see also Section 3.2.1, Page 11
6.4 Re-commissioning
a) Check the condition of the machine (cleanliness,
cabling etc.).
For installation see Section 5 Page 14
For commissioning see Section 6.1 Page 17