Elmo Rietschle F-CEVF (29),(30),(39) - Manual (Page 22)

22 | www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
Malfunctions: Causes and elimination
8 Malfunctions: Causes and elimination
Fault Cause Troubleshooting Important
Machine is
switched off
by the motor
protection
switch Mains voltage/ Frequency
does not correspond with the
motor data Check by qualifi ed electrician Section 5.5
Check all electrical connec-
tions
Motor protection switch is not
set correctly
Blower operates without con-
nection to a system Connect system Section 5.3
Insuffi cient
suction ca-
pacity Filter bags are contaminated
or full Clean or discharge fi lter bags Section 7.2.1
Suction pipe is too long or too
narrow Check the the suction pipe Section 5.3
Machine or system leaking Check the pipework and screw con-
nections for leaks and to ensure that
they are fi rmly seated Section 7.2
Machine gets
too hot Ambient or intake temperature
is too high Ensure it is being used properly Section 2.3
Blower sucks too little air Check the rotation direction resp. cross
sections of the pipes Section 6.1.1
Section 5.3
Filter bags are contaminated
or full Clean or discharge fi lter bags Section 7.2.1
Please contact Elmo Rietschle Service for other malfunctions or those that cannot be eliminated.