Elmo Rietschle C-VLR 250/300/400/500 - Manual (Page 23)

23 www.gd-elmorietschle.com © Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH |
L L K I H M
1
Maintenance and repair
Fig. 7 Lubrication
H Oil fi lling point
I Oil sight glass
K Oil discharge point
L Grease nipple
M
1
Lubrication plate
Lubrication:
The bearings on the C-VLR 400 / 500 must be lu-
bricated with 30 g of grease every 5,000 operating
hours or after no more than 2 years (see the two
grease nipples (Fig. 7/L)).
We recommend Klüber PETAMO GY 193 or other
similar greases (see lubrication plate (Fig. 7/M
1
)).
NOTICE
This lubrication interval applies when operating the
machine at an ambient temperature of 20° C. At
40°C this interval is halved.