beautypg.com

Gorman-Rupp Pumps U4B65S-B 1298951 and up User Manual

Page 16

background image

OM-05667

SUPER U SERIES

PAGE B - 9

INSTALLATION

DRIVE BELT TENSIONING

General Rules of Tensioning

For new drive belts, check the tension after 5, 20
and 50 hours of operation and re‐tension as re­
quired (see the following procedure for measuring
belt tension). Thereafter, check and re‐tension if re­

quired monthly or at 500 hour intervals, whichever
comes first.

Ideal drive belt tension is the lowest tension at
which the belt will not slip under peak load condi­
tions. Do not over‐tension drive belts. Over‐ten­
sioning will shorten both drive belt and bearing life.
Under‐tensioning will cause belt slippage. Always
keep belts free from dirt, grease, oil and other for­
eign material which may cause slippage.

This manual is related to the following products: