SM Pro Audio TC02: Dual channel microphone preamp - Manual (Page 6)

6 Installation
3. Installation
Your SM ProAudio TC01/TC02 was carefully packed in the factory and the packaging was designed
to protect the unit from rough handling. Nevertheless, we recommend that you carefully examine
the packaging and its contents for any signs of physical damage, which may have occurred in
transit.
If the unit is damaged, please do not return it to us, but notify your dealer and the shipping company
immediately, otherwise claims for damage or replacement may not be granted.
Shipping claims must be made by the consignee.
3.1 What’s in the box
- theTC01 or TC02 tube microphone pre-amplifier
- a power supply
- this manual
3.2 Desktop TC01 or rack mounted TC02
The TC01 is a compact half rack-mount sized unit perfect for environments with limited space.
Perfect for sitting on the desktop, the TC01 is suitable for just about any installation.
The TC02 fits into one standard 19“ rack unit of space (1 3/4“). Be sure that there is enough air
space around the unit for cooling. As to avoid overheating, please do not place the TC02 on high
temperature devices such as power amplifiers.
3.3 Mains Power
The TC01/TC02 ship with a standard external power supply. Connect the power supply to your
mains power and to the rear of your TC01/TC02.
3.4 Audio connections
Analog inputs
Front Panel - On the front of the TC01/TC02 you will fine the 1/4” jack instrument input/s marked
‘instrument’.
Rear Panel - On the rear of the TC01/TC02 you will find the XLR balanced microphone input/s
marked ‘Mic In’ and 1/4” unbalanced line input/s marked ‘Line’.
Analog outputs
Rear Panel - On the rear of the TC01/TC02 you will find both XLR balanced and 1/4” Unbalanced
jack output/s.