Sm pro audio hp12e – SM Pro Audio HP12E: 12 channel headphone amplifier User Manual
Page 7

SM PRO AUDIO Hp12e
Using the hp12e
• Make sure the HP12E is switched OFF and that all of the output levels controls
are set to minimum (fully counter-clockwise) before connecting any headphones
to the unit.
• Check that the correct voltage for your location has has been selected on the
HP12E rear panel before powering the unit ON.
• Connect an audio signal to either inputs A or B on the HP12E’s rear panel, and
your headphones to one of the outputs on the front of the unit. Set the output
channel’s Select switch to corresponding input and slowly increase the output
level control of the headphones.
WARNING!
High volume levels can permanently damage your ears
and your headphones. Use the HP12E with caution!
Never switch the unit ON or OFF while wearing headphones.
.
SM Pro Audio warrants the mechanical and electronic components of this product to be
free of defects in material and workmanship for a period of one (1) year from the original
date of retail purchase, in accordance with the warranty regulations. If any defects occur
within the specified warranty period that are not caused by normal wear or inappropriate
use, SM Pro Audio shall, at its sole discretion, either repair or replace the product.
• Warranty is enforceable only by the original retail purchaser.
• Warranty services will be furnished only if the product is accompanied by an original retail
dealer’s invoice. Any product deemed eligible for repair or replacement by SM Pro Audio under
the terms of this warranty will be repaired or replaced at SM Pro Audio’s sole discretion.
• If the product needs to be modified or adapted in order to comply with applicable
technical or safety standards on a national or local level, in any country that is not the
country for which the product was originally developed and manufactured, this
modification/adaptation shall not be considered a defect in materials or workmanship.
• The warranty does not cover any such modification/adaptation, irrespective of whether it
was carried out properly or not. Under the terms of this warranty, SM Pro Audio shall not
be held responsible for any cost resulting from such a modification/adaptation.
• Free inspections, maintenance/repair work, and replacement of parts are expressly
excluded from this warranty, in particular if caused by inappropriate use. Likewise, the
warranty does not cover defects of expendable parts caused by normal wear of the product.
Expendable parts are typically pots, potentiometers, switches and similar components.
warranty