Kendall Howard 5000-3-10x-CR Performance Corner Work Station - Manual (Page 2)

Your New Performance
Workstation
Congratulations on your new Kendall Howard Performance LAN Station
Workbench. This manual will step you through the assembly process. If you have
trouble, please feel free to call our customer service department from 8:30 AM to 5:30
PM CST.
Step 1. Inventory
Please be sure that you unpack the crate completely and take a complete inventory of
what you have received. This will save you much time if parts are missing and you
have to stop in the middle of the build process. We take every precaution to ensure
that you do receive all parts required; however accidents do happen in shipping that
may cause the loss of a key part. If you suspect that you are missing parts, please
contact our customer service department immediately at 651-340-1400. You will need
to have your order confirmation number before you call.
P A R T Q T Y
Levelers 6
Table Sides (1 left, 1 right) 2
Cross Bars 4
Upper Shelf Supports 8
Upper Shelf Channels 4
Upper Shelf 2
Work Surface 1
Cable Support (Left, Right, Center) 3
Back C-Frame (1 left, 1 right) 2
P A R T Q T Y
2 Work Surface Brackets 2
¾” Round Plastic End Cap 18
1 ½” Square Plastic End Cap 8
1 ½” x 2” Rectangle End Cap 4
Channel Nut 16
1 ½ Hex Drive Bolt 22
2 ½” Hex Drive Bolt 8
T-Handle Hex Wrench 1
Cross Head Screw 14